The High Lift Jack Company Built in Bloomfield, Indiana USA since 1905, Hi-Lift is still operated by the fourth generation of the Harrah family!
Hi-Lift Jacks are manufatured with over 100 years of quality and are a highly versatile jack that puts situations requiring lifting, pushing, pulling, winching, and clamping into your hands. Built to be rugged, light in weight and easy to maneuver, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3,175 kg).
Accept no imitations! Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.
Hi-Lift jacks are designed to help you survive in the most severe situations – whether you are in Moab, the Welsh Mountains, the Amazon jungle, the farmlands of Indiana with Hi-Lift or in the woods of New England with All Things Jeep. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy, period.
When it's a heavy-duty situation, the tool had better be a Hi-Lift!
The Hi-Lift Jack is available in six versions. Check out this cool Hi-Lift Jack Company Video!
All 60 Inch Hi-Lift Jacks require an additional $8.00 Shipping we've included in the retail price, so there's no surprise at check out!
Good: The 484 Cast and Steel (48 Inch) and 604 Cast and Steel (60 Inch) models are made to the same exacting standards for quality and capacity as all other Hi-Lift Jacks. They are made more affordable by using Hi-Lift's in-house stamped steel parts.
Better: The 485 (48 Inch All Cast) and 605 (60 Inch All Cast) are made from All Cast parts and are a bright, distinctive red color.
Best: The new X-Treme Hi-Lift Jack model XT-485 (48 Inch) and XT-605 (60 Inch) feature a lot of extra features for the money. There's the unique Charcoal Metallic Powder Coat finish, Gold Zinc plated hardware and the Winch-Clamp Spreader Attachment. The Winch-Clamp Spreader Attachment allows for more options for winching and tough recoveries, like when spreading a crushed roof is required. These are rated at 5,000 lbs of spreading power!
We prefer to use the Hi-Lift BEFORE landing on our roof, with either a shackle or a chain found in the HJC-ORK found elsewhere on our site. Always adhere to Tread Lightly! principles and use a tree saver strap, also found in the HJC-ORK, when recovering with a tree as the anchor point.
NOTE: This item can only be shipped UPS Ground to the 48 continental US states. We do not ship expedited and we do not ship it outside the USA.
