Difficulty Level:
Simple installation for anyone.
Installation Guides
FREE 1 to 3-Day Delivery on Orders $119+ Details
$349.99
FREE Shipping Market Price $419.99 You Save 17% ($70.00) Up to 10% off for Military & First Responders! See DetailsOpen Box from $199.49
Add Local Shop Installation
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
I'm Ryan from extremeterrain.com and this is my review and installation of the Rugged Ridge 6 Inch All Terrain Fender Flare Kit, fitting all 1997 to 2006 TJs. Today, we're gonna talk through the installation of these fender flares, which is a one out of three wrench installation, because these are designed to bolt right in place of your factory flares. We're also gonna talk about the construction of the flares. These flares are going to be a really nice option if you either have a set of factory flares, on your Wrangler, that you're looking to replace because they're either cracked or faded, and you want a set that's going to provide you with some additional tire coverage. I know in some areas, our area, in particular, you need your flares to fully cover the tread of the tire to be legal on the road. So, these 6-inch flares will provide additional coverage to keep you legal and also keep junk from getting thrown up on the side of the Jeep. These are also a pocket style flare, which do add a little bit of a different style, that some of you are going to be interested in. These flares are a little bit less expensive than some of the other ones on the market, but in my opinion, they're really well made and they look pretty good. These flares are made of a UV treated thermal plastic and, as I mentioned, they are a pocket style flare. And, because you see the hardware, this does come with all stainless hardware which is a really nice touch. You're not gonna have to worry about that hardware rusting over time. The flares also include weather stripping to go between the flare and the body of the jeep itself to keep everything from chaffing. The front flares will be able to utilize your factory turn signal, so you don't have to go out and buy any additional lighting or do any wiring. Finally, something I really like about this set is that it comes with all six pieces. You're going to have four flares for the front and rear tires, and the small flares that go behind the front tire but in front of the doors. Getting these installed, again, is going to be a simple one out of three wrenches, although it is going to be a little bit of a time-consuming install, especially if your Jeep is a little bit rusty. The factory flares are held on using nutserts through the body. So, if you have a lot of rust, as you try to back the bolts out, you can spin some of those nutserts, causing a little bit of a headache. You can get to the back of some of the nutserts to hold them with a pair of pliers which can make getting the bolts out a little bit easier. However, some of those nutserts you cannot access from the back side. So, you have to get a little bit creative with how you remove your factory flares and how you're going to install the new ones. Sometimes it's a matter of breaking off that factory nutsert, pushing it inside the body, and reinstalling a new nutsert into your tub. Now that's only something you're going to have to do if your Jeep is especially rusty and you can't get the factory flares off. If you can get those factory flares off easily and all of the factory nutserts are left in place, then this installation, again, is a very simple one, although it can take a little bit of time. So, to get the factory flares off, you simply unbolt all of the hardware holding them in place. You'll want to first remove the bolt out of your factory turn signal by giving it a quarter turn and then just pulling it to remove. And once you have the factory flares off, you'll remove that turn signal housing and install it in your new flare. After that, it's just a matter of using the included stainless hardware to get your new flares bolted on your Jeep. All you'll need to get this job done is a traditional set of hand tools and some time. I would set aside around three hours to get this installation finished. I think that these flares are really fairly priced. They come with everything that you need to get them installed from the weather stripping to hardware, and it's stainless steel hardware, so you don't have to worry about it rusting. It comes with all 6 pieces, you get some additional tire coverage from either three and a half or four and a quarter inches of coverage from your factory flares, depending on your model, all the way up to 6 inches. So, all in all, I would say that this is a pretty good deal for a set of flares that has a lot of features. So whether you're just looking to replace your factory flares because they're cracked or faded or you want a set of pocket styled flares that give you more coverage to keep you legal and keep the tires from throwing junk up on the side of your Jeep, this is going to be a really nice set of flares that will also save you some money over some of the other brands out there. So that's my review of the Rugged Ridge 6 Inch All Terrain Fender Flare Kit, fitting all 1997 to 2006 Wranglers, that you can find right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Brand | Rugged Ridge |
Fender Flare Material | Plastic |
Fender Flare Finish | Smooth Black |
Fender Flare Size | Wide |
Fender Flare Style | |
Fender Flare Install Type | No Drilling |
Construction. Protect the paint on the sides of your vehicle from mud and debris with high-quality components in the Rugged Ridge 6-inch All-Terrain Fender Flare Kit. The kit includes fender flares and fasteners. These fender flares are constructed from UV-treated, ABS thermoplastic material to stand up to rugged use. They can be painted to blend perfectly with the color of your vehicle. Fasteners in the kit are made from stainless steel for durability.
Performance. Rugged flares in this Jeep Wrangler YJ fender flare kit are engineered to withstand tough off-road conditions.
Fitment. Rugged Ridge fender flares are compatible with Jeep Wrangler TJ 97-06 models. They easily fit into the factory mount holes with rust-proof fasteners.
Fitment:
Rugged Ridge 11630.10
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Difficulty Level:
Simple installation for anyone.
Installation Guides
What's in the Box
10 More Questions